Product Categories
Contact Us

Tianjin Zerpo Supply Co.,Ltd

TEL: +86 22 23858635, 23858636, 23858637

Moblie:+8613821202887

Fax:+86-22-23858634

Email: info@zerpo.com

Home > News > Content
The Function Of The Inflatable Tool
Tianjin Zerpo Supply Co.,Ltd | Updated: May 18, 2018

Inflatable tool inflation

1. Place the accumulator vertically and remove the protective nut and the protective nut of the inflation valve above the accumulator.

2. Turn the handle of the air-inflating tool to the left side until the top rod is flush with the shoulder; 3. Tighten the air-inlet valve joint nut (M14*1.5) and the inflation valve;

4. Tighten the hose connector (G5/8”) with the nitrogen bottle connector;

5. Open the air valve loosely and open the nitrogen bottle. The air in the hose is discharged from the air release valve.

6. Tighten the air release valve, right-handed inflation tool handle, top open the accumulator inflation valve, inflate the accumulator, observe the indicator value of the pressure gauge;

7, inflated to the required pressure value, left-handed inflatable tool handle, until the accumulator valve is closed, close the nitrogen bottle, open the air release valve, discharge the nitrogen in the hose, the inflatable tool from the inflation valve;

8. Turn on the inflation valve guard nut and accumulator guard nut.

Manometer

1. Place the accumulator vertically and unscrew the protective nut on the top of the accumulator and the protective nut of the inflation valve. 2. Rotate the handle of the inflator to the top and the shoulder flush; 3. Inflate Valve joint nut (M14*1.5) and inflation valve tightened;

4, tighten the air valve;

5, right-handed inflatable tool handle, top open accumulator gas filling valve, observe the indicator value of the pressure gauge, this value is the accumulator inflation pressure value;

6. Lean the inflator tool handle until the accumulator inflation valve closes, open the bleed valve, and unscrew the inflation tool from the inflation valve.

Deflation 

1. Place the accumulator vertically and remove the protective nut and the protective nut of the inflation valve above the accumulator.

2. Rotate the handle of the inflator tool to the top with the shoulder flush;

3, tighten the air valve joint nut (M14*1.5) and the inflation valve;

4, tighten the air valve;

5, right-handed inflatable tool handle, top open accumulator gas filling valve, observe the indicator value of the pressure gauge, this value is the accumulator inflation pressure value;

6, open the air release valve, accumulator deflation, observing the pressure gauge indication value, to reach the required value, the left hand inflated tool handle until the accumulator inflation valve is closed, open the air release valve, the inflatable tool from the inflation valve Unscrew it.


Feedback
Tianjin Zerpo Supply Co.,Ltd
If you have any enquiry about quotation or cooperation, please feel free to email us at info@zerpo.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
Copyright © Tianjin Zerpo Supply Co.,Ltd All Rights Reserved.